Description

BRAND NEW NISSAN TB48 WIRING HARNESS

SUITS ALL TB48 EFI ENGINES.

NISSAN PATROL TB48 CONVERSION WIRING LOOM.

PERFECT FOR CONVERTING YOUR NISSAN PATROL TO TB48
THIS HARNESS IS COMPLETE AND READY TO INSTALL.

SUITS HALTECH 750 ELITE ECU.

WHATS INCLUDED.
COMPLETE WIRING HARNESS TO PLUG INTO YOUR TB48 ENGINE WITH YOUR CHOICE OF INJECTOR PLUGS CAN CHOOSE STANDARD OR AFTERMARKET JUST LET US KNOW DURING CHECK OUT WHAT INJECTOR TYPE YOU HAVE.
BRAND NEW CONNECTORS.
AIR TEMP SENSOR.

NOTE THIS HARNESS SUITS MANUAL ONLY – IF YOUR CAR IS AUTO IT CAN BE SETUP AS A PIGGY BACK BUT YOU WILL NEED TO CONTACT US DIRECT

HOW IT WORKS
YOU HAVE TO CONNECT 4 WIRES.. THAT’S RIGHT ONLY 4 WIRES
SIMPLY PLUG THE ENGINE HARNESS INTO YOUR ENGINE.
ATTACH THE 2 BATTERY WIRES TO YOUR BATTERY 1 POWER (RED) AND 1 EARTH (BLACK).
CONNECT TO SUPPLIED UPGRADED POWER WIRE TO YOUR FUEL PUMP IT IS A SINGLE WIRE FOR THE POSITIVE SIDE OF YOUR FUEL PUMP SUITED TO HANDLE WALBRO 460
THE LAST WIRE TO CONNECT IS A (PINK) WIRE THAT NEEDS IGNITION POWER. THE BEST LOCATION TO GET THIS IS YOUR IGNITION BARREL.

ALL WIRES ARE MARKED.
ALL WIRES A FUSED WITH A RELAY FOR SIMPLE INSTALLATION.

BUY THIS HARNESS AND SAVE HOURS / DAYS OF MESSING AROUND. NO MORE SHITTY NISSAN AIRFLOW METERS HAS HALTECH USED AN INTERNAL ECU MAP SENSOR

INCLUDED IS A BASE MAP TO GET YOU RUNNING.

IF PURCHASING THE ECU ALSO IT IS WATERPROOF.

BRAIDED LOOM WRAP USED WITH HEAT SHRINK ENDS.

THERE IS ALSO AN OPTION TO BUY A ECU WITH THIS HARNESS.

ANY QUESTIONS ABOUT THIS ITEM PLEASE DO NOT HESITATE TO CONTACT US.